RS:electricalCoupler

From railML 2 Wiki
Revision as of 11:25, 8 December 2011 by RailML Superseded Users (talk | contribs) (Type constraints added)
Jump to navigation Jump to search


electricalCoupler
 


Scheme description / Schemenbeschreibung

Position of electricalCoupler in the XML-Tree / Position von electricalCoupler im XML-Baum

  • Parent: <couplers>
  • Children: Not yet described. / Noch nicht beschrieben.

Multiplicity / Anzahl

[1..1]

Semantics / Bedeutung

(introduced with version 2.0)

The element <electricalCoupler> contains all data related to the electrical coupling devices used between the vehicles. This means any cables used for control or power supply.

Das Element <electricalCoupler> beinhaltet alle Daten für alle elektrische Kupplungen zwischen den einzelnen Fahrzeugen. Dies beinhaltet alle elektrischen Verbindungen für Steuerung oder Stromversorgung.

Attributes of electricalCoupler / Attribute von electricalCoupler

  • designType: This is the description of design and function of the electrical coupling. Possible values are:
  • pushTrainControl36 conventional pushing train control with 36 lines
    Wendezugsteuerung (Konventionelle Wendezugsteuerung-DB, 36-polig)
  • pushTrainControl34 conventional pushing train control with 34 lines
    Wendezugsteuerung (Konventionelle Wendezugsteuerung-DR, 34-polig)
  • emergencyBrakeDeactivation cable for deactivation of emergency brake function
    Kabel zur Steuerung der Notbremsüberbrückung
  • UIC-IS-cable21 UIC-IS cable with 21 lines
  • UIC556 standard cable according UIC 556
  • UIC558-18 standard cable according UIC 558 with 18 lines
  • UIC568-13 standard cable according UIC 568 with 13 lines
  • wireTrainBus Wire Train Bus (WTB)
  • multifunctionVehicleBus Multifunction Vehicle Bus (MVB)
  • trainCommunicationNetwork Train Communication Network (TCN)/(WTB+MVB)
  • vehicleSpecificConnection electrical connection specific for that vehicle
    Fahrzeugspezifische Verbindung
  • fibreOptics connection of fibre optics in general
    Lichtwellenleiter (allgemein)
  • unknown unknown type of coupling device
  • other:anything: Any value that does not fit any value from the previous enumeration list, fulfilling the constraint: at minimum two characters, whitespace is not allowed. Please, apply Dev:usingAny accordingly.
    any other type of coupling device
  • positionOnCarEnd: This is the basic position of the coupler with regard to the car ends, i.e. front/rear/both.
  • positionOnMechanicalCoupler: This is the basic position of the electrical coupling device in relation to the mechanical coupler, used when integrated coupling device. It can be one of the listed values.
  • none The electrical coupling device is not integrated in the mechanical coupler.
  • aside The electrical coupling device is mounted on both sides of the mechanical coupler.
  • ontop The electrical coupling device is mounted on top of the mechanical coupler.
  • below The electrical coupling device is mounted below the mechanical coupler.
  • numberContacts: This is the number of contacts/lines the electrical coupling device provides. The value shall be consistent with the designType.

Syntactic Constraints / Syntaktische Beschränkungen

  • designType optional
  • positionOnCarEnd mandatory
  • positionOnMechanicalCoupler optional

The element can occur several times for a vehicle.

Best practice & Examples / Empfohlene Anwendung & Beispiele

Not yet described. / Noch nicht beschrieben.

Notes / Anmerkungen

Not yet described. / Noch nicht beschrieben.

Open issues / Offene Punkte/Pendenzen

Not yet described. / Noch nicht beschrieben.