RS:gangway

From railML 2 Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.


gangway
 


Scheme description / Schemenbeschreibung

Position of gangway in the XML-Tree / Position von gangway im XML-Baum

  • Parent: <passenger>
  • Children: Not yet described. / Noch nicht beschrieben.

Multiplicity / Anzahl

[0..∞]

Semantics / Bedeutung

The element <gangway> contains all data for gangways alowing the interchange to neighbouring vehicles.

Das Element <gangway> beinhaltet alle Daten für die Beschreibung von Wagenübergängen, die von Personen während der Fahrt genutzt werden können.

Attributes of gangway / Attribute von gangway

  • frontEnd: This is the flag, whether there is a gangway on the front end of the vehicle.
  • rearEnd: This is the flag, whether there is a gangway on the rear end of the vehicle.
  • position: This specifies the position of the gangway, assuming the same position for both ends. Possible values are:
  • standardUIC position according UIC standard
  • upperDeck position for interchange at upper deck level
  • lowerDeck position for interchange at lower deck level
  • other:anything: Any value that does not fit any value from the previous enumeration list, fulfilling the constraint: at minimum two characters, whitespace is not allowed. Please, apply Dev:usingAny accordingly.
    any other position
  • designType: This is a selection of possible design types. It shall be same type for both sides or only one gangway at all. Possible values are:
  • standardUIC561 The standard UIC gangway of the well-known rubber type.
  • special A special design type of gangway.
  • nonPublic A gangway which can be used by staff but not the public.
  • sigI Design type I of a gangway from SIG.
  • sigII Design type II of a gangway from SIG.
  • unknown Unspecified design type of gangway.
  • other:anything: Any value that does not fit any value from the previous enumeration list, fulfilling the constraint: at minimum two characters, whitespace is not allowed. Please, apply Dev:usingAny accordingly.
    any other design type of gangway
  • floorLevel: The height of the gangway's floor above top of rail in metres.
  • gangwayHeight: The (inner) height of the gangway for passenger use in metres.
  • gangwayWidth: The (inner) width of gangway for passenger use in metres. If the width differs over height the smallest value shall be given here.

Syntactic Constraints / Syntaktische Beschränkungen

  • position optional
  • designType mandatory
  • floorLevel xs:decimal, 6 fraction digits, length value measured in meter, optional
  • gangwayHeight xs:decimal, 6 fraction digits, length value measured in meter, optional
  • gangwayWidth xs:decimal, 6 fraction digits, length value measured in meter, optional

The element gangway can be used several times for any vehicle.

Best practice & Examples / Empfohlene Anwendung & Beispiele

Not yet described. / Noch nicht beschrieben.

Notes / Anmerkungen

The description of gangway position can be very roughly by attribute position or with detailed dimensions. In latter case the attribute position shall not be used.

Open issues / Offene Punkte/Pendenzen

Not yet described. / Noch nicht beschrieben.