RS:pantograph

From wiki.railML.org
Jump to: navigation, search

pantograph
 


Scheme description / Schemenbeschreibung / Description du schéma

Position of pantograph in the XML-Tree / Position von pantograph im XML-Baum / position de pantograph dans l’aborescence XML

Multiplicity / Anzahl / Multiplicité

[0..∞]

Semantics / Bedeutung / Sémantique

The element <pantograph> contains all data of a vehicles pantograph.

Das Element <pantograph> beinhaltet alle Daten für einen Stromabnehmer des Fahrzeugs.

Attributes of pantograph / Attribute von pantograph / Attributs de pantograph

  • orderNumber: This is the number of the pantograph on the vehicle starting with '1' from the A-end (front).
  • designType: This is the descriptive name of the design type of the pantograph.
  • positionOnSection: This is the position of the pantograph seen from the vehicle's A-end (front). Possible values are:
  • front This names the first position (seen from the front end) above the leading bogie of the vehicle/section.
  • frontSecond This names the second position (seen from the front end) above the leading bogie of the vehicle/section.
  • middle This names the position in the middle of the vehicle/section.
  • rearSecond This names the second position (seen from the rear end) above the rear bogie of the vehicle/section.
  • rear This names the first position (seen from the rear end) above the rear bogie of the vehicle/section.
  • other:anything Any value that does not fit any value from the previous enumeration list, fulfilling the constraint: at minimum two characters, whitespace is not allowed.
  • fittedSection: This is the number of the section the pantograph is fitted to in case of an articulated vehicle consisting of several individual carbodies like an EMU.
  • controlType: This is the way of controlling the pantograph activation. Possible values are:
  • cable The pantograph is activated/de-activated by means of a rope or cable.
  • spring The pantograph is activated/de-activated by means of a spring.
  • air The pantograph is activated/de-activated by means of pressurised air.
  • other:anything Any value that does not fit any value from the previous enumeration list, fulfilling the constraint: at minimum two characters, whitespace is not allowed.
  • headWidth: This is the width of the current collecting stripes of the pan head in metres.
  • maxCurrentDriving: This is the maximum current in Ampere, which the pantograph can transfer during driving of the vehicle.
  • maxCurrentStandstill: This is the maximum current in Ampere, which the pantograph can transfer in standstill of the vehicle.

Syntactic Constraints / Syntaktische Beschränkungen / Contraintes syntactiques

  • positionOnSection mandatory
  • controlType optional
  • headWidth xs:decimal, 6 fraction digits, length value measured in meter, optional
  • maxCurrentDriving xs:decimal, 1 fraction digit, current value measured in Ampere, optional
  • maxCurrentStandstill xs:decimal, 1 fraction digit, current value measured in Ampere, optional

The element is optional and can occur several times.

Best practice & Examples / Empfohlene Anwendung & Beispiele / Bonnes pratiques & exemples

Not yet described. / Noch nicht beschrieben. / Pas encore décrit.

Notes / Anmerkungen / Notes

The element is independent of propulsion systems because one pantograph might be used for several propulsion/supply systems. Refer to <dedicatedSupplySystem>.

Open issues / Offene Punkte/Pedenzen / Questions ouvertes

Not yet described. / Noch nicht beschrieben. / Pas encore décrit.